AP1013CEN

18V 1ch H-Bridge Motor Driver

  • Inquiry
  • Digi-Key
  • Data Sheet

Description

Motor Drivers
The AP1013 is the single H-bridge motor driver which has four drive modes, forward, reverse, brake and standby, to operate up to 18V motor supply voltage. N type LDMOS is built in both high and low side for output driver to achieve small package. It also has under voltage detection and thermal shut down circuits. It is suitable for driving various types of small motors.

Key Features

□ Control Supply Voltage:            2.7V to 5.5V

□ Logic Terminal Supply Voltage:       1.62V to Control Supply Voltage

□ Wide Motor Drive Operating Voltage: 2V to 18V(NMOS high side and Low side architecture)

□ Maximum Output Current (DC): 1.3A

□ Maximum Output Current (Peak): 2.2A (Ta=25℃, less than 10ms in 200ms

or less than 5ms in100ms)

□ Maximum Output Current (Peak): 3.3A (Ta=25℃, less than 5ms in 200ms

or less than 2.5ms in 200ms)

□ H-Bridge On Resistance: RON(TOP+BOT)=0.36Ω @25℃

□ Power-Down Mode: VM leakage current less than 1μA (Ta=25℃)

□ Built-in Under Voltage Detection Circuit: Detection Voltage ; 2.2V

□ Built-in Thermal Shut Down Circuit (Tj): 175℃

□ Junction Temperature: 150℃

□ Package: 16-pin 3mm×3mm QFN Package

 ※ AP1013CEN has Stop Function by EN pin.
      AP1013DEN has selectable control logic controlled by SEL pin.

>> Read more

Block Diagram

Block Diagram

Page Top

top