AP1014AEC

7.0V 2ch H-Bridge Motor Driver

  • Inquiry
  • Digi-Key
  • Data Sheet

Description

Motor Drivers
The AP1014AEC has four drive mode of forward, reverse, brake and standby by 2 channel H-bridge Motor Driver corresponding to operating voltage 7.0V. It is possible to set to the input logic which was suitable for the PWM drive with the SEL terminal. The AP1014W layout Nch LDMOS FET in high side and low side in output circuit and realize a small WL-CSP package. Also it has Under voltage detection and thermal shut down circuits. It is suitable for driving various small motor.

Key Features

Motor Operating Voltage 2.0 to 7.0V
Control Supply Voltage 2.7 to 5.5V
Maximum Output Current(DC) 1.1A (Ta=25℃)
Maximum Output Current(Peak) 2.0A (Ta=25℃, 10ms/200ms)
H-Bridge On-Resistance(High+Low) 0.35Ω (Ta=25℃)
Under Voltage Lockout Circuit (UVLO)
Thermal Shutdown Circuit (TSD)
Package 16-pin WLCSP (1.96mm×1.96mm)
Operating Temperature Range -30°to 85°C

>> Read more

Block Diagram

Block Diagram

Page Top

top