SCI bus 2Kbit Serial CMOS EEPROM
The AK6420A is a 2048bit, serial, read/write, nonvolatile memory device fabricated using an advanced CMOS EEPROM technology.
The AK6420A has 2048bits of memory organized into 128 registers of 16 bits each.
The AK6420A can operate full function under wide operating voltage range from 1.8V to 5.5V. The charge up circuit is integrated for high voltage generation that is used for write operation.
The AK6420A can connect to the serial communication port of popular one chip microcomputer directly (3 line negative clock synchronous
interface). At write operation, AK6420A takes in the write data from data input pin (DI) to a register synchronously with rising edge of
input pulse of serial clock pin (SKB). And at read operation, AK6420A takes out the read data from a register to data output pin (DO)
synchronously with falling edge of SKB.
The AK6420A has 4 instructions such as READ, WRITE, WREN (write enable) and WRDS (write disable). Each instruction is organized by
opcode block (8bits), address block (8bits) and data (8bits×2). When input level of SKB pin is high level and input level of chip select (CSB) pin
is changed from high level to low level, AK6420A can receive the instructions.
Special features of the AK6420A include : automatic write time-out with auto-ERASE, Ready/BusyB status signal output and ultra-low standby
power mode when deselected (CSB=high).
□ 2048 bits: 128×16 organization
□ LOW POWER CONSUMPTION
- 0.75mA Max (Read operation)
- 0.8μA Max (Standby mode)
□ HIGH RELIABILITY
- Endurance : 100K cycles
- Data Retention : 10 years
□ SPECIAL FEATURES
- High speed operation ( fMAX=1MHz: VCC=2.5V )
- Automatic write cycle time-out with auto-ERASE
- Automatic address increment (READ)
- Ready/BusyB status signal
- Software and Hardware controlled write protection
□ 8pin SSOP