SPI bus 64Kbit Serial CMOS EEPROM
The AK6512CA is a 65536-bit, serial, read/write, non-volatile memory device fabricated using an advanced CMOS EEPROM technology.
The AK6512CA has 65536-bits of memory organized as 8192 registers of 8 bits each.
The AK6512CA can operate all function under wide operating voltage range: 1.8V to 5.5V. The charge up circuit for high voltage
generation needed for write operations is integrated.
The AK6512CA serial interface is compatible to a SPI bus. The AK6512CA has 6 instructions: READ, WRITE, WREN (write enable),
WRDI (write disable), RDSR (read status register), and WRSR (write status register).
Each instruction is organized by an op-code (8bits), address (16bits), and data (8bits). When input level of CSB pin changed from
high level to low level, AK6512CA can receive instructions.
□ 64Kbits; 8192 × 8 organization
□ SPI Serial Interface Compatible
□ High Speed Operation (fMAX=10MHz: VCC=4.5V to 5.5V)
□ Low Power Consumption
0.8μA Max. (Standby mode)
□ High Reliability
Endurance: 1000K E/W cycles / Address
Data Retention: 10 Years
□ Special Features
32 byte Page Write Mode
Block Write Protection (Protect 1/4,1/2 or Entire Array)
Automatic write cycle time-out with auto-ERASE
□ Software and Hardware controlled Write Protection
□ Self timed Programming Cycle: 5msec. Max.
□ 8pin SSOP