Microwire(TM) bus 1Kbit Serial CMOS EEPROM
The AK93C45C is a 1024-bit serial CMOS EEPROM divided into 64 registers of 16 bits each.
The AK93C45C has 6 instructions such as READ, WRITE, PAGE WRITE, EWEN, EWDS and WRAL.
Those instructions control the AK93C45C.
The AK93C45C can operate full function under wide operating voltage range. The charge up circuit is integrated for high voltage
generation that is used for write operation.
A serial interface of AK93C45C, consisting of chip select (CS), serial clock (SK), data-in (DI) and data-out (DO),
can easily be controlled by popular microcontrollers or standard microprocessors. AK93C45C takes in the write data
from data input pin (DI) to a register synchronously with rising edge of input pulse of serial clock pin (SK).
And at read operation, AK93C45C takes out the read data from a register to data output pin (DO) synchronously with rising edge of SK.
The DO pin is usually in high impedance state. The DO pin outputs "L" or "H" in case of data output or BusyB/Ready signal output.
VCC = 1.6V to 5.5V(WRITE/WRAL/PAGE WRITE)
□ 1024 bits, 64 × 16 organization
□ SERIAL INTERFACE
- Interfaces with popular microcontrollers and standard microprocessors
□ LOW POWER CONSUMPTION
- 0.8μA Max. Standby
□ High Reliability
- Endurance : 1000K E/W cycles / Address
- Data Retention : 10 years
□ Automatic address increment (READ)
□ Automatic write cycle time-out with auto-ERASE
□ BusyB/Ready status signal
□ Software and Hardware controlled write protect
□ 8pin TMSOP