FAQ

EM Series / EW-6672 : Hall Effect ICs

EM / EW-6672 

[Q0410]
・Shall the bypass capacitor be installed?
A.
・Install in principle.
Was it helpful?
Yes
No
Thank you We will reflect your opinion on the improvement of the web content. 
[Q0411]
・What is the difference between EM-0711 (EM-1711) and EM-1712?
A.
・When PDN = H, in EM-0711 (EM-1711), the hall element drives continuously, but in EM-1712, the pulse drive turns on. Therefore, EM-1712 has smaller consumed current.
Was it helpful?
Yes
No
Thank you We will reflect your opinion on the improvement of the web content.

Related FAQ

Hall Effect ICs 

[Q0405]
・Where is the sensor location in the package? 
A.
・For the location viewed from the sensor top, refer to the pdf file for each grade. For the depth from the marked surface, click here.
Was it helpful?
Yes
No
Thank you We will reflect your opinion on the improvement of the web content. 
[Q0406]
・Which output is present at power on, H or L? 
A.
・When the magnetic flux density is Bop or higher, it is L. When it is Brp or lower, it is H. When it is between Bop and Brp, it varies.
Was it helpful?
Yes
No
Thank you We will reflect your opinion on the improvement of the web content. 
[Q0407]
・What kind of plating is applied to the lead terminals in the hall effect IC? 
A.
・The EW-5 series is palladium plated. All others are tin plated and comply with RoHS. (As of April 2007)
Was it helpful?
Yes
No
Thank you We will reflect your opinion on the improvement of the web content. 
[Q0408]
・TBD 
A.
・:
Was it helpful?
Yes
No
Thank you We will reflect your opinion on the improvement of the web content.
FAQ - EW Series (w/o EW6672)

FAQ 
- EW Series
(w/o EW6672)
FAQ - EM Series , EW6672

FAQ
- EM Series ,
EW6672